Más de 7500 artículos disponibles en stock
El mejor precio garantizado
Tu distribuidor de artículos para la astronomia
Astrofotografía > Cámaras > Cámaras para astronomía > Altair Astro > Hypercam > Altair Astro Cámara Hypercam 174M mono
Nº de producto: 58223

Cámara Hypercam 174M mono

$ 980,00 IVA incluido, más gastos de envío
¿demasiado caro?
Rojo
Este producto ya no está disponible + Tiempo transporte

Descripción del producto

La descripción de este producto no está disponible en español. Esperamos que la versión en inglés le sea de utilidad. En cualquier caso, sentimos las molestias.

The Altair Hypercam IMX174 camera has the sought-after Sony Pregius Global Shutter IMX174 CMOS sensor, with extremely low read noise and 2.3 megapixel resolution.

The IMX174 sensor is particularily desirable for solar and high resolution planetary imaging at long focal lengths, where high frame rates, and high dynamic range are required to get the most detail in post processing.

Hypercam IMX174 imaging applications: The IMX174 sensor is a very good match for a Daystar Quark with refractor because the large pixel size, global shutter, low read noise and wide dynamic range allow prominences and surface detail to be captured in the same frame, without having to over-expose the image and lose detail. Images sharpen up very well because there is no fixed pattern noise with this sensor. The Hypercam IMX174 camera has been developed with solar imaging in mind, and works best with 100mm plus refractors and the Daystar Quark operating at around 3000mm focal length or more. It really comes into it's own with larger refractors.

To sum it up, the most desirable features of the IMX174 sensor are:

  • Large format 1/2" sensor
  • Peak quantum efficiency of 78%
  • Global shutter eliminates motion distortion inherent in rolling shutter sensors, as well as CCD-smearing.
  • Fixed pattern noise (common with global shutter CMOS cameras) is eliminated
  • Low read noise 6 electrons (e-)
  • Saturation (full well) capacity 32,000 electrons (e-)
  • Dynamic range 73 dB

Video astronomy and long exposure deepsky imaging: Although the Hypercam IMX174 is considered the best tool for long focal length solar system imaging, it is also quite capable of long exposures, and will deliver very good results for deepsky imaging and video astronomy (or EAA) using the Live Stacking features in the free AltairCapture software or SharpCap. Time-lapse all-sky imaging and video is fully supported, and the camera can be used with a CS-Mount lens to hunt for meteors or aurora.

Speed and reliability in one camera: USB3.0 and on-board memory buffering give much faster transfer speeds than the GPCAM USB2.0 series, pushing the USB3.0 format to the limit, yet within a stable envelope. Memory buffering almost completely eliminates dropped frames and corrupted video files, a common problem with USB cameras, and enables faster more consistent frame rates, even with less powerful notebook computers. Consistency and stability is improved for video capture sequences - especially desirable for scientific applications.

Autoguiding: The camera has an ST4 auto-guiding port, and can be used to auto-guide with mounts from all the major manufacturers supporting ST4 format, including iOptron, Celestron and Skywatcher.

Fan cooling: The Hypercam is cooled with and internal low vibration fan. The fan can be switched on or off and the speed controlled in AltairCapture and SharpCap. Cool air is drawn in through the vents at the side of the casing, over a large internal heat-sink. The heat-sink is connected directly with the sensor board just like a computer CPU. The free flow of air through the casing cools not only the sensor, but all the internal electronics boards. Cooling is especially desirable for long exposure imaging to reduce thermal noise. Some camera casings get uncomfortably hot during a solar imaging session, and the sensor can reach around 60 or even 70 degrees. This can cause the electronics to become glitchy and unreliable. The Hypercam is designed for consistent, reliable solar imaging with a solar filter and diagonal or Hershel Wedge. With the fan running, the Hypercam casing will always remain cool.

Especificaciones

Capacidad


Tipo de sensor
Sensor CMOS (Sony IMX174)
Megapíxel
2,3
Resolución foto
1920 x 1200
Tamaño de píxel
5,86
Interfaces
USB 3.0
Muestreo digital (Bit)
12
Conexión (lado de telescopio)
1,25" & T2
Enfriamiento
Cámara a color
no
Tamaño de chip (mm)
11,34 x 7,13
Eficiencia cuántica
78%
Ruido de lectura
6
Tiempo de exposición máximo (min)
16
Tiempo de exposición mínimo
25 µ
Backfocus (mm)
12,78
Autoguía
Diagonal del chip (mm)
13,4

Peculiaridades


Filtros infrarrojos
no

En general


Diámetro (mm)
65
Altura (mm)
80
Serie
Hypercam
Peso (g)
320

Aplicaciones


AllSky, Meteore
no
Autoguía
Luna y planetas
Nebulosas y galaxias

Accesorios recomendados

Filtro (2)
Filtro de bloqueo

Omegon Filtro UV/IR CUTOFF 1,25"

$ 79,00*
Espectrografía & Fotometría (1)
Espectroscopio

Paton Hawksley Espectroscopio Star Analyser 100

$ 203,00*

*Todos los precios incluyen IVA y gastos de envío.

Altair Astro Cámara Hypercam 174M mono
Eficiencia cuántica

Opiniones de clientes

Aun no hay críticas sobre este producto.

Escribe tu crítica:

¿Tiene preguntas específicas sobre su pedido o su producto? Póngase en contacto con nuestro servicio de atención al cliente.